AMS ASSEMBLY

Disassembled piece of furniture or equipment with wooden base, black mounting brackets, and hardware including screws and a mounting bracket

Locate 4 of these pieces and attach 2 brackets with silver assembly bolts.

A wooden part, possibly a boat or furniture piece, with two black clips on one end, and in the top left corner, a small inset shows a black metal bracket, a screw, and a screw hole.

Locate 4 of these pieces and attach 2 brackets with silver assembly bolts.

The image shows the underside of a wooden chair with two black screws and two black clips. A single screw is removed and placed above the chair, and there are black lines pointing to the screws with measurements of 36 inches and 42 inches.

Next, place the pieces as shown in the picture and attach the black, height positioning bolts. The 2 holes on the left will make the stands 36” tall and the holes on the right will make them 42” tall.

Wooden table turned upside down with metal brackets, showing the underside and legs.

Insert tenons into the pockets on the bottom pieces and attach 4 silver assembly bolts.

Upward view of a small wooden table with adjustable legs against a light-colored background.

Do the same for the top piece.