The Tamagotchi is Gear Hive's three-bay sit/stand recording studio desk — a premium, height-adjustable workstation that lets you produce, mix, and record at the perfect height whether sitting or standing. The dual-motor electric lift supports up to 200 lbs and moves the entire desk smoothly from 27.5" to 47.2" at the touch of a button.

Three slanted rack bays (3×2U, 3×3U, or 3×4U) run across the top of the desk, flanking a monitor bridge with 2" cable grommets for clean monitor wiring. Cable management clips under the rack bays keep everything tidy. Optional USB/power hub mounts to the desktop. Available with an optional 41" keyboard tray 61-key keyboard.

Features:

• Sit/Stand adjustable base with dual motor electric lift system in Black or White that supports 200 lbs

• Desktop height adjustable from 27.5” - 47.2”

• 2 x 2” grommets on upper shelf for monitor cable access

• USB/power hub on desktop (optional)

• Cable management clips under rack bays

Available rack sizes: 3 x 2U, 3 x 3U, and 3 x 4U
Table top dimensions: Width: 60” x Depth: 14”
Monitor bridge dimensions: Width: 61” x Depth: 13”

Assembly Guide

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

*2x2U in Natural finish with 39.25” keyboard tray pictured

The Starter is Gear Hive's entry-level recording studio desk — purpose-built for home studio owners who want professional-quality furniture without the professional price tag. At 47" wide and 23" deep, it's compact enough for small rooms while still delivering a full studio setup: dual rack bays for your interface, preamp, or processor, a cable-managed desktop, and a solid, 3-rod, 28" hairpin leg base.

Two 2" grommets on the upper monitor shelf and two 3" cable holes on the main desktop keep your wiring clean and out of the way. An optional slide-out keyboard tray fits both a compact 23" keyboard-and-mouse combo or a full 39.25" 61-key controller. Available in rack sizes 2×2U, 2×3U, or 2×4U, or with no racks at all.

Built from A1 birch plywood with real birch edge banding and finished in 15 premium stains with a low-VOC eco-friendly clear coat.

Keyboard Tray - Max weight: 40 lbs. Height clearance between tray and bottom of desk: 3.5”.
Available rack sizes: 2 x 2U, 2 x 3U, and 2 x 4U
Dimensions: Table Height: 28.75” x Width: 47” x Depth: 23”

Assembly Guide

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

Dark Walnut stain with No Racks pictured.

The Starter Sit/Stand is Gear Hive's height-adjustable recording studio desk — all the functionality of the original Starter, upgraded with an electric sit/stand base that lets you raise or lower your entire studio setup at the touch of a button. Whether you prefer to produce standing, sitting, or anywhere in between, the Starter Sit/Stand adapts to your workflow.

The electric lift base supports the full desk and gear load, moving smoothly between seated and standing heights. Dual rack bays keep your most-used studio equipment within reach, while cable management grommets and optional keyboard tray keep your workspace clean. Available in rack sizes 2×2U, 2×3U, or 2×4U.

Built from A1 birch plywood with real birch edge banding and finished in 15 premium stains.

Available rack sizes: 2 x 2U, 2 x 3U, and 2 x 4U
Table top dimensions: Width: 47” x Depth: 23”

Assembly Guide

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

Carrington stain pictured.

The London 1 is Gear Hive's compact mixing and mastering studio desk — a purpose-built workspace for engineers who need integrated rack space without the sprawl of a full-width setup. At just 22" wide, it packs 6U of top rack space and a choice of 6U of bottom rack or an enclosed storage compartment into a clean, vertical footprint that fits even the tightest studio corners.

The elevated top shelf positions your monitors at the right height while keeping rack-mounted gear at eye level during sessions. The bottom section gives you flexible configuration: 6U for additional processors, power conditioners, or patch bays, or a closed door storage compartment for cables, drives, and accessories.

Built from A1 birch plywood with real birch edge banding, finished in 15 premium stains with a low-VOC eco-friendly clear coat.

Dimensions: 22” W x 32” D x 34” H / Desktop Depth: 10” / Top Shelf Depth: 11”

Assembly Guide

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

The London 2 is the expanded version of the London 1 — a wider, more fully-featured recording studio desk that adds a monitor bridge and greater surface area for your complete studio setup. With integrated rack bays and a raised monitor shelf, it gives mixing and mastering engineers a clean, ergonomic workspace that keeps everything within reach.

Built from A1 birch plywood with real birch edge banding and finished in 15 premium stains with a low-VOC eco-friendly clear coat. Cable management is built in throughout, keeping your desktop clean for focused sessions.

Key features

• 12U top rack space: dual 6U angled bays for ergonomic access

• Configurable bottom section: choose 12U additional rack space or enclosed storage with doors

• Compact footprint: ideal for small studios, bedrooms, and edit suites

• Big-studio aesthetic: clean lines and a pro look that elevates any room

• Built to hold real gear: plenty of rack capacity in a space-saving design

Dimensions: 41” W x 32” D x 34” H / Desktop Depth: 10” / Top Shelf Depth: 11”

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

The London 3 is Gear Hive's largest studio desk — a premium recording workstation with 30U of rack space, built for engineers, producers, and musicians who want their studio furniture to match the level of their gear. Wider, deeper, and more fully-featured than the London 1 and 2, the London 3 delivers a complete studio setup in a single, beautifully crafted piece.

Integrated rack bays keep your equipment organized and accessible. A dedicated monitor bridge elevates your speakers to the optimal listening position. Every surface, edge, and joint is finished to the same standard as Gear Hive's studio racks — A1 birch plywood, real birch edge banding, and your choice of 15 premium hand-applied stains.

Dimensions: 61” W x 32” D x 34” H / Desktop Depth: 10” / Top Shelf Depth: 11”

Assembly Guide

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

The Midway is Gear Hive's mid-century modern recording studio desk — a bold architectural statement that brings real studio functionality to a space-defining piece of furniture. Its signature geometry: sharp square angles, crisp lines, and an asymmetrical base where one side floats elegantly over a built-in 12U floor rack while the other rests on L-shaped square steel tube legs.

Above the base, the desktop features a dual-bay rack system (2×2U, 2×3U, or 2×4U) for direct access to your most-used hardware, plus an optional full-extension keyboard tray and recessed power hub. The 12U floor rack is available on the left or right side and provides 23" of depth for preamps, compressors, power conditioners, and more.

Built from A1 birch plywood with real birch edge banding and finished in 15 premium stains.

Key Features:

• Bold square-angle design for a distinct, architectural look

• Midcentury modern inspiration with contemporary functionality

• Integrated 12U floor rack (left or right configuration)

• Dual desktop rack bays for ergonomic gear access

• L-shaped square steel legs + floating side support

• Optional keyboard tray and recessed power hub

• Built with precision for modern music creators

For those who believe their studio should look as intentional as their sound.

Desktop rack sizes: 2 x 2U, 2 x 3U, or 2 x 4U, or no racks at all.
Dimensions: Desktop Height: 28.75” x Width: 57.5” x Depth: 23”

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

The Starter (No Legs) is the Gear Hive Starter desktop without a leg base — giving you the same dual rack bays, cable management grommets, and premium birch plywood construction on a surface you can mount to your own frame, integrate into a custom studio build, or pair with a sit/stand base of your choosing.

Ideal for builders who want the Gear Hive aesthetic and quality without being locked into a specific height or base configuration. The desktop surface includes dual rack bays (2×2U, 2×3U, or 2×4U), two 2" monitor shelf grommets, and two 3" desktop cable holes.

A1 birch plywood with real birch edge banding, finished in 15 premium stains with a low-VOC eco-friendly clear coat.

Dimensions: 47” W x 23” D

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

The Gear Hive Desk Topper is a wood monitor riser with integrated rack bays — designed to sit on top of your existing desk and give you an elevated monitor position plus convenient rack space for your most-accessed gear, all in one clean unit. It's the fastest way to add Gear Hive quality and function to any studio setup without replacing your desk.

Available in multiple rack bay sizes and finished in 15 premium stains to match your existing Gear Hive furniture or complement any studio aesthetic. Built from A1 birch plywood with real birch edge banding and a low-VOC eco-friendly clear coat.

Features:

• Premium plywood with edge banding

• 2 x 2” grommets on upper shelf for equipment cable access

• Cable access between rack bays

Available rack sizes: 2 x 2U, 2 x 3U, and 2 x 4U
Dimensions: Width: 43” x Depth: 12.5”

Built to order in Lodi, California — ships for FREE in 1–2 weeks.

The Gear Hive Keyboard Tray is a smooth-sliding pull-out keyboard shelf designed to integrate seamlessly with your current desk — or add controller space to any custom studio setup. Whether you're keeping a 61-key controller tucked away during mixing or need a dedicated keyboard-and-mouse surface that disappears when you don't need it, this tray handles it cleanly.

Available in multiple widths to accommodate compact keyboard-and-mouse setups or full 61-key controllers. Finished in 15 premium stains to match your existing Gear Hive furniture. Built from A1 birch plywood with real birch edge banding.

Directly compatible with Gear Hive's Starter and Midway desk models.

Features:

• rounded front edges and adjustable drawer slides. 13” depth.

• 40 lbs. weight capacity

• Height clearance between tray and bottom of desk: 3.5”

• Comes with mounting brackets and all required mounting hardware.

Built to order in Lodi, California. Ships for FREE in 1–2 weeks.